|
sparesRus Home
|
|
Hotpoint & Creda Door Seals
|
|
|
Catalogue Index
|
|
|
|
| |
|
18 Series door gasket |
|
|
| |
|
Door seal to fit early Hotpoint front loaders. Fits
18 series machines with a plastic back panel.
The manufacturer does not recommend fitting
this door seal to 95 series machines |
|
| |
|
|
| |
|
|
| |
|
1
|
| |
|
|
|
|
| |
|
|
|
| |
|
Early 95 series machines |
|
|
| |
|
Door seal to fit Hotpoint early 95 series washing machines.
This door seal is fitted to the front of the machine with two curved grey platic retainers.
|
|
| |
|
|
| |
|
|
| |
|
2
|
| |
|
|
|
|
| |
|
|
|
| |
|
Later 95 and early WM series machines |
|
|
| |
|
Door seal to fit various Creda and Hotpoint front loaders
where the motor is at the top of the drum. The front of the gasket is held on by wire or string. The rear is held
with a 12mm wide band clamp.
Only for use with a 12mm door seal retainer! Please
check the type of retainer attached to the drum before ordering |
|
| |
|
|
| |
|
|
| |
|
3
|
| |
|
|
|
|
| |
|
|
|
| |
|
Late WM series door gasket |
|
|
| |
|
Door seal to fit recent Creda, Electra, English Electric,
Gala, General Electric, Hotpoint and Jackson washing machines where the motor is at the top of the drum. The front
of the gasket is fitted with a wire clamp. The gasket is clamped to the drum with a thin wire clamp.
Only for use with a 2mm wire door seal retainer!
Please check the type of retainer attached to the drum before ordering |
|
| |
|
|
| |
|
|
| |
|
4
|
| |
|
|
|
|
| |
|
|
|
| |
|
WMA door gasket |
|
|
| |
|
Door seal to fit Creda and Hotpoint washing machines.
|
|
| |
|
|
| |
|
|
| |
|
5
|
| |
|
|
|
|
|
Catalogue Index
|
|
|
|
|
Door seals for
|
> |
Electra (Merloni) Servis
Whirlpool
|
|