© 1999 - 2008 sparesRus

Creda Hotpoint drain pumps

Catalogue Index

Hotpoint & Creda pumps

		Pump to fit early Hotpoint machines
		This pump fits early 95xx models (where the pump is the same side as the soap dispenser). This pump does not require an earth wire or a cooling fan. Where fitted the wedge shaped mounting bracket should be discarded and the new pump mounded directly to the cabinet base. Inlet: 35mm, Outlet: 30mm, Electrical connection: 6.3mm terminals, Fixings 22mm apart

		Pump to fit Creda & Hotpoint
		This pump fits later 95xx machines (where the pump is the opposite side to the soap dispenser). This part directly replaces old type pumps that have an external cooling fan. Electrical connection is via two 6.3mm terminals. The earth connection is no longer required. Inlet: 35mm, Outlet: 30mm, Electrical connection: 6.3mm terminals, Fixings 22mm apart

		Pump to fit Creda & Hotpoint
		This pump fits late 95xx and early WMxx models (where the pump is the opposite side to the soap dispenser). Electrical connection is by a two wire plug. Inlet: 35mm, Outlet: 30mm, Electrical connection: Plug, Fixings 22mm apart

		Pump to fit Creda & Hotpoint
		This pump fits late WMxx models. The pump outlet is fitted with a rubber flap valve. Inlet: 35mm, Outlet: 34mm, Electrical connection: Plug, Fixings: 22mm apart

		Pump to fit Hotpoint
		This pump fits the new WMAxx series machines Hotpoint models WMA30 WMA31 WMA32 WMA33 WMA10P WMA11P WMT01P WMT02P WMT03P WMA30P WMA30N WMA30S WMA31P WMA31N WMA31S WMA32P WMA32N WMA32S WMA33P WMA33N WMA33S WMA33YS WMA34P WMA34N WMA34S WMA35P WMA35N WMA35S WMA36P WMA36N WMA36S WMA37P WMA37N WMA37S WMA37YS WMS38P WMS38N WMS38S WMS39P

Pumps for

>

Ariston Bosch Candy Hoover Indesit Philco Philips Siemens Whirlpool